STEINEL PROFESSIONAL RC 8 Mode D'emploi page 2

DE GB FR NL IT ES PT SE DK
3
4
5
6
12
14
15
110065015 06/2018_M
GB ENGLISH
Principle
The optional remote control for the Presence Control PRO makes larger-scale lighting systems easier to install as it
obviates the need to set each presence detector prior to installation. Any number of Presence Control detectors can
be controlled by remote control. The blue LED on the sensor flashes to indicate each valid press of the button.
Functions
Reach setting (factory setting: 8 m max.)
1
Reach can be set from a minimum of 1 m, 1/3, 2/3 to a maximum of 8 m by pressing these buttons
(for HF-sensors only).
Basic light level (10%) (factory setting: OFF)
2
Basic light level deactivated
Information
Basic light level all night
RC 8
Basic light level for the time shown
Time setting CH 1 - stay-'ON' time Switching contact 1 (factory setting: IQ mode)
3 Test mode. The test mode has the purpose of checking for proper working order as well for testing the
detection zone. Irrespective of ambient light level and movement, the presence detector activates the light
to stay 'ON' for approx. 8 sec. Test mode has priority over all other settings. All user-selected settings apply
FI NO GR TR HU
in normal mode. Test mode ends automatically after 10 min.
4 IQ mode. Stay-'ON' time is self-learning and adjusts dynamically to user behaviour. The optimum time is
determined by means of a learning algorithm. The shortest time is 5 min., the longest time 20 min.
1 5 Setting the light to stay 'ON' for a time of your own choice. Each press of the button increments the
chosen time setting by 1 minute.
6 The period of time you want the light to stay 'ON' for after last detecting movement can be set from
between 5 min., 10 min. to 30 min. by pressing these buttons.
Time setting CH 2 - stay-'ON' time Switching contact 2 (HVAC) (factory setting: 5 min.)
7 The period of time you want light 'ON' for / to stay 'ON' for after last detecting movement can be set
2
from between 5 min., 10 min. to 15 min. by pressing these buttons.
Time setting CH 2 - Delay (time delay) (factory setting: ON/OFF)
8
Room surveillance ON/OFF
Automatic adjustment of switch-'ON' delay after persons are present in the detection zone.
7
9 No time delay.
10
Time delay 10 min.
8
Light threshold setting (factory setting: 5)
11 The chosen response threshold can be set from approx. 10 – 1000 lux.
9
Examples of use
Night-time mode
Corridors, foyers
Stairs, escalators, moving walkways
10
Washrooms, toilets, switchrooms, canteens
Sales floor, kindergartens, nursery school rooms, sports halls
Work areas: offices, conference and meeting
rooms, precision assembly activities, kitchens
Working areas requiring good light:
Laboratory, technical drawing, precision work
Daylight mode
11
12
Night mode
Teach-IN. Light level setting using the memory button/Teach mode. This button must be pressed at the
14
13
level of light at which you want the sensor to respond to movement from now on. The current twilight
value is saved.
16
15 Constant-lighting control (factory setting: ON)
ON = blue LED lights up. OFF = blue and red LED light up
Automatic or manual mode (factory setting: ON / fully automatic)
16
17 ON = blue LED lights up. OFF = blue and red LED light up, manual mode
17
Reset
Resets all settings to the values selected on the detector manually or to the factory settings.
CR2032
Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an environmentally compatible
manner.
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment and its implementation in national
law, electrical and electronic equipment no longer suitable for use must be collected separately and recycled in an envi-
ronmentally compatible manner.
Functional Warranty
As purchaser, you are entitled to your statutory rights against the vendor. If these rights exist in your country, they
are neither curtailed nor restricted by our Warranty Declaration. We guarantee that your STEINEL Professional sensor
product will remain in perfect condition and proper working order for a period of 5 years. We guarantee that this product
is free from material-, manufacturing- and design flaws. In addition, we guarantee that all electronic components and
cables function in the proper manner and that all materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage paid with the original receipt of purchase,
which must show the date of purchase and product designation, either to your retailer or contact us at STEINEL (UK)
Limited, 25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a returns number. For this reason,
we recommend that you keep your receipt of purchase in a safe place until the warranty period expires. STEINEL shall
assume no liability for the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to www.steinel-professional.de/garantie
If you have a warranty claim or would like to ask any question regarding your product, you are welcome to call us at
any time on our Service Hotline 01733 366700.
5
Brightness settings
1
2
3
4
5
6
13 Daylight mode
Do not dispose of electrical and electronic equipment as domestic waste.
Y E A R
MANUFACTURER'S
WARRANTY