Machine Control; Description And Function Of Controls; Switch Box; Gas Control Lever - Seco STARJET AJ 102 Manuel D'instruction

MACHINE CONTROL

6 . MACHINE CONTROL
6.1

DESCRIPTION AND FUNCTION OF CONTROLS

6.1.1 MOWING MECHANISM SWITCH
The switch of the mowing mechanism switches on th electromagnetic clutch whose pulley transfers the drive from the engine by means of the V-belt
to the pulley of the mowing mechanism. The switch is locked in "OFF" position against an unwanted switching on. To switch on, it is necessary to pull
out a bit the switch lever and tip it to the "ON" position.
OFF
ON

6.1.2 SWITCH BOX

The key has 3 positions:
OFF - ignition switched off
ON - ignition switched on
START - engine starting

6.1.3 GAS CONTROL LEVER

It controls the engine revolutions.
The individual positions of the lever are, as follows:
MIN
MAX

CHOKE *

* This gas control lever is only provided in machines equipped with the BS15, TE 17 and H 16 engine.
6.1.4 CHOKE
It enables the start of the cold engine. The machines equipped with the BS15, TE 17 and H 16 engine
are not provided with the independent choke.

6.1.5 BUZZER

After the grass collecting bin is full, the circuit is closed by means of a flap on the rear plate
of the bin and the buzzer sounds. However, the mowing mechanism drive is not disengaged.

6.1.6 HEADLAMP SWITCH

The headlamps placed in front on the bonnet are turned on and off by a switch positioned
together with other switches by the steering wheel.

6.1.7 ENGINE HOUR METER

The engine hour meter is installed in dependence on the machine version.
It is in operation only with the ignition switched on and
the seat switch switched on (automatically by the weight of the operator).
Any manipulation with the engine hour meter means
the loss of guarantee. If a failure of the meter occurs, inform Your service immediately.
Engine idle running
Engine max. revolutions
Engine cold start
15
ENGLISH