AEG SR 4374 CD/USB Mode D'emploi page 33

All manuals and user guides at all-guides.com
• Only in USB mode:
Hold down the button in stop mode about 3 seconds to
select the next folder.
TUN.– / (6)
The button can be used as follows:
Press once = This jumps back to the previous track.
Press twice = This plays the song before etc.
If the button is kept pressed down, the machine starts to
search through the tracks.
/ +10 / M.+ (13)
• The playback is stopped. The number of titles on the
storage medium is displayed.
• Only in USB mode:
Keep the button pressed to skip 10 songs forward. Pro-
vided that there are more than 10 titles available.
PROG. / M. / P-MODE (10)
• In stop mode for programming any order of tracks (see
the section on "Playing Back Programmed Tracks").
• When playing back music to select the replay mode (see
next chapter).
When playing an audio CD:
Press once = (REPEAT flashes) The current track is
repeated continuously.
Press twice = (REPEAT lit) The whole CD is played
continuously.
Press three times = (RAN appears in the display) All titles are
replayed successively in random order.
Press four times = All functions are cancelled. The normal
play mode is resumed.
Only for current audio files via USB:
Press once = (REPEAT flashes) The current track is
repeated continuously.
Press twice = The current folder is repeated contin-
uously (the display will show REPEAT
FOLDER).
Press three times = (REPEAT lit) The whole CD is played
continuously.
Press four times = (RAN appears in the display) All titles are
replayed successively in random order.
Press five times = All functions are cancelled. The normal
play mode is resumed.
SR 4374 CD-USB_IM
Playing Back Programmed Tracks
This can be used to program any desired sequence of tracks.
1. Press the / +10 / M.+ button.
2. Press the PROG. / M. / P-MODE button. "P 01" (Storage
space) and the notification "PROGRAM" will appear in the
display. Use the / buttons to select the desired
track and then press the MODE button again. The display
changes to memory slot P 02.
3. Select the next track with the
the PROG. / M. / P-MODE button again. Repeat the proce-
dure until all the desired tracks are selected.
NOTE:
Once the storage capacity of the tracks to be pro-
grammed has been reached "FUL" flashes in the display.
4. Press the / –10 / M.– button. The playback starts. The
notification "PROGRAM" will appear additionally in the
display.
5. Press once the / +10 / M.+ button to stop the playback
while retaining the program.
6. To play the programme back again, press the
button.
The device stops automatically after all programmed titles
have been played. The listed sequence remains in the memo-
ry until you switch to a different operating mode.
Deleting a Programmed Sequence
To delete the program, press the
The notification "PROGRAM" will disappear.
PC / AUX IN socket
For connecting to external players, e.g. MP3 player, smart-
phone, tablet PC etc.
1. Please connect the external device with a 3.5 mm stereo
jack plug to the PC / AUX IN socket.
2. Start the playback of your audio source. You will hear
the sound playback from the external device through
the loudspeakers. Use the
volume. The control buttons are not operational.
3. For the remaining procedure please see the operating
instructions of the external sound source.
NOTE:
Adjust the volume of the external device to a comfortable
level.
Reset device to factory settings
1. Switch the device to radio mode.
2. Important! The radio stations you saved will be deleted.
Keep pressing the / +10 / M.+ button. The device then
switches to CD mode.
English
33
/ buttons and press
/ –10 / M.–
/ +10 / M.+ button twice.
/ buttons to adjust the
16.06.16