PNI IP60 live Manuel Utilisateur page 5

• The camera will start the initialization. When the camera stops rotating, it
is ready for configuration.
Note: Before using the camera, fully charge the battery for about 8 hours using
the power adapter included in the package. Connect the power adapter to the
black connector with rubber cover.
• The battery status information is provided by the 3 LEDs located on the
metal bracket:
Left LED - Charging
On - Solar charging
Off - No charge (no
sun)
5
Central LED - Battery
Flashing red: battery
charged ≤ 25%
Flashes red and green:
battery charged ≤ 50%
Flashes green: battery
charged ≤ 75%
Light green: battery
charged ≤ 100%
Right LED - Output
status
On - Active output
Off - Output off
User manual