Power Dynamics DECK 750 Manuel D'instructions page 4

DECK LEVELLER INSERT
Align the stage decks with deck leveller insert and use 3 pieces on a 2x1m stage. Place 1 piece of deck leveller insert on one
meter side and 2 pieces on 2 meter side.
CAUTION! Height difference between the stage decks should not exceed 2mm to avoid tripping.
DECK TO DECK CLAMP
1. Connect each stage deck with a deck clamp.
2. Use 3 clamps per stage deck. Place 1 piece of deck clamp on short and 2 pieces on long meter side.
3. Repeat this as often as necessary.
4