Troubleshooting - WOLFF VACUCLEAN Mode D'emploi

6.0 Troubleshooting

Problem
Motor will not start.
The motor stops directly
after starting.
Fan runs but no suction.
Fan runs but poor suction.
Machine blows dust.
Abnormal sound from
machine.
Kompaktsauger VACUCLEAN, Artikel-Nr. 021014,
All manuals and user guides at all-guides.com
Fault
Machine not connected.
Incorrect fuse.
Hose not connected.
Hose plugged.
Hole in the hose.
Plugged filter.
Hose too long or too small
Hose is kinked.
Machine top is mounted
incorrectly.
Dust is packed in the
cyclone.
Filter is perforated or has
come loose.
03/2006Fugenfräse FRÄSMASTER
Solution
Make sure connection.
Change to correct circuit.
Connect the hose.
Find and remove block.
Change or repair hose.
Clean or change filter.
Change the hose.
Check and free.
Adjust the mounting.
Take off the top and clean
out.
Check the filters and
change if necessary.
Order service.
11