Page 1
Ex tb – AC1WD LAMEPROOF ENCLOSURE SERIES Solution 22, impasse de la Volute - BP 20708 - 16430 Champniers – France Ex-tech Tel: +33 (0)5 45 93 01 10 - Fax: +33 (0)5 45 93 01 15 - E-mail: sales.solution@ex-tech.no - www.ex-tech.no...
Page 2
été prévue. EX-TECH SOLUTION ne saurait être tenue pour responsable de dommages résultant d'une utilisation EX-TECH SOLUTION shall not be held liable for erronée ou inadéquate ou du non-respect du présent damages resulting from incorrect or improper use or mode d'emploi.
Page 3
Zones 21&22 due to dusts EN / IEC 60079-0 EN / IEC 60079-31 EN / IEC 60079-1 6.3. Marquages / Marking IECEx Atex Atex & IECEx Ex-tech Ex-tech Ex-tech AC1WD… AC1WD… AC1WD… IECEx INE 21.0016X INERIS 03ATEX0145X IECEx INE 21.0016X (N°...
Page 4
Mode d’emploi / Operating instructions Enveloppe antidéflagrante modèle AC1WD / Flameproof enclosure - AC1WD series 6.4. Paramètres électriques / Electrical parameters: AC1WD Maximal voltage: Maximum intensity: 1000 The maximum dissipated powers are shown in the table below for the various ambient temperatures and temperature classes.
Page 5
5 mm. excessifs de poussières supérieure à 5mm selon EN/IEC 60079-31 n’est pas autorisé. Ex-tech Solution ensures the traceability of the enclosures up the first place of delivery. Le suivi de la traçabilité des produits n’est assuré...
Page 6
IEC/EN 60079-1. For more information, contact Ex- norme IEC / EN 60079-1. Pour plus d'informations, tech Solution. contactez Ex-tech Solution Avoid dust deposit > 5mm and perform periodic Évitez toute formation de couche de poussières > 5mm cleaning with a damp cloth.
Page 7
Mode d’emploi / Operating instructions Enveloppe antidéflagrante modèle AC1WD / Flameproof enclosure - AC1WD series 8. Mise en service Before starting Make sure the unit has been correctly settled and Assurez-vous que l’appareil a été installé not damaged correctement et ne soit pas endommagé...
Page 8
355, rue de la Génoise – Z.A. les Montagnes 16430 Champniers – France Tel : + 33 5 45 61 81 68 – Fax : + 33 5 45 23 29 46 E-mail : sales.signalling@ex-tech.no – www.ex-tech.no Ex-tech System Maskinven 12 p.o. box 256 forus 4066 Stavanger –...