Ref. 07579
START THE MOTOR BASE
Speed adjustment
The switch is not permanently activated in the 'PULSE' configuration. You have
After using the blender, always move the switch to setting '0' and disconnect
the plug from the mains.
To remove the glass beaker, simply lift it from the motor base. It is not necessary
to turn it to remove it.
HELPFUL TIPS
- For best results when mashing (cooked solid ingredients), place small portions
in the glass jar, one by one, instead of pouring a large amount in one go.
- If you are processing carrots, first cut them into small pieces (1 - 1.5cm).
The maximum recommended amount of carrots should not exceed 720g. Then
add water, note that the total weight should be less than 1,800g.
- Whenever you want to process solid ingredients, first cut them into small
pieces (1-1.5 cm).
- When mixing the solid ingredients, start with a small amount of liquid first.
Gradually add more and more liquid through the opening in the lid.
- Always place your hand on the blender when you are using the device.
- To remove solid or very thick liquid ingredients, we recommend that you use
the blender in boost mode to prevent the blades from jamming.
SPECIFICATION
Voltage: AC 220V-240V - 50 / 60Hz
Power: 1.200W
Short-term operation: max. 2 minutes for the blender
ENGINE BASE
Never immerse the motor base in water. Clean only with a damp cloth.
1-4
5
0
PULSE
Instruções importantes de segurança / important safety instructions
Use
For light use with liquids.
For greater solid consistency
- for mixing liquids and solid
foods.
Stop the operation.
For crushing ice and short
and powerful impulse
movements.
Instrucciones importantes de seguridad