Lenze ECSZS000X0B Instructions De Montage page 15

Control cable/system bus cable
Mounting the wire clamps
5
 Screw the wire clamps for the shield
connections of the control cable and the
system bus cable tightly onto the axis
module using a 3 mm Allan key.
EDKCSZS000 DE/EN/FR 4.1
Mounting ECSxA axis module
Control cable/system bus cable
ecs081
Connecting the shield
 Press the wire clamps for the shield
connections of the control cable and the
system bus cable down using a screw driver
(3 mm blade).
Place the cables under the wire clamps.
Remove the screw driver
15
6
ecs082
