Lenze ECSZS000X0B Instructions De Montage page 14

Motor cable/Brake control
Mounting the shield sheet

Insert the M6 screws into the elongated holes and attach the shield sheet

Attach the wire clamp for the shield connection of the brake control to the shield sheet using a
3 mm Allen key
Connecting the shield of the motor cable
 Put the wire clamp for the shield connection
onto the motor cable and press it down.
Move it towards the axis module until the
wire clamp snaps into place.
 Put a cable tie around the motor cable.
Fasten the cable to the shield sheet.
EDKCSZS000 DE/EN/FR 4.1
Mounting ECSxA axis module
Motor cable/Brake control
ecs078
Connecting the shield of the brake control
 Press the wire clamp for the shield
connection of the brake control down using a
screw driver (3 mm blade).
Place the cable under the wire clamp.
Remove the screw driver.
14
ecs077
ecs079
