Nicols PAR COB 60 RGB IP Notice D'utilisation page 7

TECHNICAL SPECIFICATION

Power supply : AC 100V-240V, 60Hz/50Hz

LED : 1 x LED COB 60W RGB

Consumption : 56W

Working modes : Built-in Programs, Auto Running Mode, DMX mode, Master/Slave and Static Color

DMX channels : 3, 5, 7

Beam angle: 40°
OPERATION
BUILT-IN PROGRAMS
1.
a. Press MODE until Pr.01 shows. Press SETUP.
b. Use buttons UP and DOWN to switch from one program to another: Pr.01 to Pr.07. Press SETUP.
c. In Pr.01, you have access to Static Color. Press UP and DOWN buttons to select a color. Then adjust strobe
speed :
d. In Pr.02 to Pr.07 :
adjust running speed :
-
Adjust strobe speed :
-
STATIC COLOR (Pr.01)
DISPLAY
BUILT-IN PROGRAMS (Pr.02 – Pr.07)
PROGRAM
AUTO running mode :
2.
Press MODE, when AUTO is on, press SETUP. You'll be able to adjust running speed, strobe speed and effects.
MASTER/SLAVE mode
3.
To set the device under SLAVE mode, press on MODE until SLAV is on.
STATIC COLOR mode
4.
a. Press on MODE until "Colr" is on, then press SETUP
COLORS
White
Red
Orange
Pale Yellow
Green
Cyan
Blue
Purple
Pink
Yellow
Cold white
Warm white
DESCRIPTION
Static colors
7-color fading
3-color fading
Dream
7-color hopping
3-color hopping
Other hopping