PNI HU180 Manuel Utilisateur page 3

OPERATION MODE
1. Hold the device upright. Remove the
cover from the upper area (Fig. 1)
2. Connect the power adapter to the
device (Fig. 2)
3. Add cold water to the tank using the
cup included in the package. Add the
essential oils to the water tank (Fig. 3)
Notes: Do not add hot water in the tank. Do
not add water when the product is in use. Do
not exceed the level indicated on the tank.
4. Replace the cover. Rotate it to find
the desired position for the steam exit
(Fig. 4)
5. Plug the power adapter into a power
outlet (230V)
6. Press the MIST button and choose the time you want the device to
release vapors (press once - 1 hour, press 2 times - 3 hours, press 3 times
- 6 hours, press 4 times - ON, permanently on and press 4 times - OFF,
permanently off) (Fig. 5)
Press the LIGHT button to turn on the LEDs. There are 7 colors with
7.
varying light intensity (Fig. 6)
3