Publicité
VOLTA 100 / VOLTA 133
Replacement lighting
Automatic Testing System:
description and instruction notes
VOLTA light fittings are provided with an emergency unit able to run tests automatically, in order to check the
working order of the emergency system:
- Function test (30 seconds): Once a week, it checks the good working order of components, including lamps.
- Duration test (1 or 3 hours): Once a year, it determines whether the batteries are able to fulfill the
requirements.
When possible, these tests are designed to happen during a period of non-occupancy, in order to avoid
annoyance. The test result is indicated by the colour of the LED inside the luminaire:
LED colour
permanent green
fast blinking green
(0,1s on / 0,1s off)
slow blinking green
(1s on / 1s off)
permanent red
slow blinking red
(1s on / 1s off)
fast blinking red
(0,1s on / 0,1s off)
N.B.: After commissioning, the luminaire is designed to launch a commissioning test in order to check the
good working order of components and the emergency duration. This test will run from 5 to 30 days after the
commissioning of luminaires.
WARNING: AFTER COMMISSIONING, DO NOT FORGET TO RECONNECT THE BATTERY.
-
AFTER EACH RELAMPING, RECONNECT THE CONNECTOR AND PUSH THE RED BUTTON TO
-
LAUNCH A 30 SECONDS AUTO-TEST. THE LED LIGHT MUST THEN GO PERMANENT GREEN.
Sammode SA
Sammode SA
24 rue des Amandiers, F-75020 Paris
24 rue des Amandiers, F-75020 Paris
Status
Everything is OK
Function test in progress
Duration test in progress
Lamp failure
Open circuit, or lamp default
Battery failure
Battery failed the duration test or the
function test
Incorrect charging current
Batteries cannot charge
3/4
What must be done ?
Nothing
Nothing
Nothing
Change the lamp if needed, or check the
position of the lamp
If batteries are new, the connection
poles may have been inverted.
If not, batteries need to be changed.
Batteries need to be changed.
4/4
SAT Gamme VOLTA
SAT Gamme VOLTA
Octobre 2011
Octobre 2011
Publicité
