User Control; Status Led - Miranda picoLink Serie Notice D'installation Et D'utilisation

4.2 User control

Switch 1 Group
1 Insertion on Group 1
2 Insertion on Group 2
3 Insertion on Group 3
4 Insertion on Group 4
Switch 2 Option
1 Ctrl. Packet insert
2 Cascade
3 Sync.ó ó Async.
4 Not used
Cascade mode
Cascade Audio group selection
1
ON ON
ON OFF
ON OFF
ON OFF
ON OFF
ON 2 groups or more on ON position
OFF ON
OFF OFF
OFF OFF
OFF OFF
OFF OFF
OFF 2 groups or more on ON position

4.3 Status Led

The tri-color Led indicates the AMX-172p status
Led status
Green
Green
Green
Yellow
Red
Off
Comment
Selection of the group where incoming AES is inserted
Comment
ON / OFF: allows Control Packet code insertion.
ON / OFF: See chart below for operation mode.
Conformity of incoming AES with SDI signal.
Embedded / Pass-through audio group
2 3 4
OFF OFF OFF Group 1 embedded, Gr. 2-3-4 present on SDI IN pass-through.
ON OFF OFF Group 2 embedded, Gr. 1-3-4 present on SDI IN pass-through
OFF ON OFF Group 3 embedded, Gr. 1-2-4 present on SDI IN pass-through.
OFF OFF ON Group 4 embedded, Gr. 1-2-3 present on SDI IN pass-through.
OFF OFF OFF Groups 1-2-3-4 present on SDI IN pass-through.
Group 1 embedded, Gr. 2-3-4 present on SDI IN pass-through.
OFF OFF OFF Clear Audio HANC from SDI IN, embed AES IN on Group 1
ON OFF OFF Clear Audio HANC from SDI IN, embed AES IN on Group 2
OFF ON OFF Clear Audio HANC from SDI IN, embed AES IN on Group 3
OFF OFF ON Clear Audio HANC from SDI IN, embed AES IN on Group 4
OFF OFF OFF Groups 1-2-3-4 present on SDI IN pass-through.
Clear Audio HANC from SDI IN, embed AES IN on Group 1
SDI Signal AES 1 Signal
Ok
Ok
Ok Fail or missing
Ok Fail or missing
Fail or missing
-
Guide to installation & Operation
Idem
Idem
Idem
AES 2 Signal
Ok
Ok Fail or missing
Fail or missing
-
-
9
AMX-172p
Power
Ok On
On
Ok On
On
- On
- Off