Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Installation
INSTALLING THE LEVELING LEGS
Carefully check the utility sink for damage and/or missing parts prior
to installation . If there is any damage or if you are missing parts, do
not proceed with the installation . Report damage and/or missing parts
immediately to the manufacturer . Do not dispose of packaging before
you are satisfied with your new utility sink.
- Remove the utility sink (B) and place it on a soft, protective
surface .
- Turn the cabinet (C) upside down onto a protective surface .
- Gently put each leveling leg (D) into its proper location . Using the
four screws provided (BB) per leveling leg, attach the leveling
legs (D) to the bottom of the cabinet (C) .
- Gently right the cabinet (C) .
- Using a carpenter's level, turn the base of each leveling leg (D)
until the cabinet (C) is level .
CAUTION:
Do not place side load onto feet when righting
the cabinet .
BB
D
C
QL057
DOOR HANDLE INSTALLATION
1 . Insert the door hand screws (AA) into the pre-drilled holes
on each door .
2 . Attach the door handles (A) and hand tighten the door
handle screws (AA) .
3 . Repeat on other door .
A
DOOR POSITION ADJUSTMENT
If the doors need to be repositioned, the hinges can be
adjusted to ensure a precise fit with the cabinet.
4 . The lateral adjustment
screw adjusts the door
left or right .
5 . The horizontal
adjustment screw
adjusts the door forward
or backward .
6 . The vertical adjustment
screw adjusts the door
up or down .
6
AA
1
2
3
Publicité
Chapitres
Table des Matières
