nedis WIFICDP20WT Guide De Démarrage Rapide page 7

Preparing the product
1. Unscrew the hexagonal bolt A
2. Unscrew the battery cover A
3. Optional: insert a microSD card (not included) into the microSD card slot A
to locally store recordings.
4. Insert the required batteries into the battery compartment A
-
Observe the plus (+) and minus (–) marks on the cell, battery and equipment
and ensure correct use.
Installing the Nedis SmartLife app
1. Download the Nedis Smartlife app for Android or iOS on your phone via
Google Play or the Apple App Store.
2. Open the Nedis Smartlife app on your phone.
3. Create an account with your e-mail address and tap Continue.
You will receive a verification code on your e-mail address.
4. Enter the received verification code.
5. Create a password and tap Done.
6. Tap Add Home to create a SmartLife Home.
7. Set your location, choose the rooms you want to connect with and tap Done.
Connecting the app
1. Tap + in the top right corner in the Nedis SmartLife app.
2. Select the product type you want to add from the list.
3. Confirm the status indicator LED A
If A doesn't blink blue, reset the product by holding the reset button A
e
with a pin for 5 seconds.
4. Enter the Wi-Fi network data and tap Confirm.
5. Tap Continue and a QR-code will appear.
6. Hold your phone with a 15 – 20 cm distance in front of the camera.
If the camera has detected the QR-code, you will hear a sound.
7. Tap to confirm you heard the sound.
8. Give the product a name and tap Done. A
ready for use.
Making video recordings and screenshots
• You can make video recordings and screenshots on your phone, by tapping
Record and Screenshot.
4 from the bottom of the bracket
1 to open the product.
e is blinking.
turns blue. The product is now
e
7
,
t
y .
6