Hama 014167 Mode D'emploi page 6

Note - Car battery
With some vehicles, it can happen that power
continues to be supplied even though the ignition has
been switched off. You should therefore disconnect
the product from the line connection when not in use
to protect your car battery from being drained.
Note - Car charger
• On some types of vehicle, the ignition must be
switched on for the voltage to travel to the car
socket. For more information, please refer to your
vehicle's owners' manual.
• Use the enclosed car charger only to charge this
device.
5. Getting started
A
b
• Position the supplied hook and loop strip in a suitable
place in the car and attach the Bluetooth hands-free
facility to it.
B
• Connect the 3.5 mm jack plug (5) to the car's AUX
socket.
C
• Plug the USB car charger (1) into the car's cigarette
lighter socket and then connect the USB plug (6)
on the Bluetooth hands-free facility to the USB car
charger.
D
• You can now connect your transmitting device (e.g.
smartphone) to the Bluetooth hands-free facility.
6. Operation
6.1 First connection via Bluetooth
Note
• Make sure that your Bluetooth
switched on and that Bluetooth
• For more information, please refer to the operating
instructions of your device.
b
® (pairing)
® -capable device is
® is activated.
3