AEG FAVORIT 45020 VI1P Notice D'utilisation page 25

German
degrees
(°dH)
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.
Manual adjustment
Electronic adjustment
1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
'Setting and starting a programme'.
2. Press and hold, at the same time,
button and button
the indicators of buttons
and
3.
Press button
• The indicators of buttons
and go off.
Water hardness
French mmol/l
degrees
(°fH)
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
until
,
start to flash.
.
Clarke
degrees
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
•
The indicator of button
tinues to flash.
• The current setting of the water
softener is indicated by intermit-
tent acoustic signals and the flash-
ing of the end indicator.
– E.g. 5 acoustic signals and 5
flashes + pause + 5 acoustic sig-
nals and 5 flashes = level 5.
4.
Press button
to change the setting. Each time you
press the button you select the next
level.
5. Deactivate the appliance to confirm
the setting.
ENGLISH
25
Water softener
adjustment
Manual Elec-
tronic
1 3
1 2
2) 2)
1 1
con-
again and again