Technical Data - Westfalia AMG 18 Mode D'emploi

Rated Voltage
Nominal Speed
Sound Level
Air Velocity
Intake Vacuum
Dimensions
Net Weight (without battery)
Hand Arm Vibration
* The declared vibration total value and the declared noise emission values have been measured in
accordance with a standard test method and may be used for comparing one tool with another. The
declared vibration total value may also be used in a preliminary assessment of exposure.
Warning!
The vibration and noise emission during actual use of the power tool can differ from the declared total
value depending on the ways in which the tool is used, in particular, what kind of work piece is
machined.
It is necessary to identify safety measured to protect the operator that are based on an estimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched off and when it is running idle in addition to the trigger time)
Try to minimize the impact of vibration and noise. Exemplary measures to reduce vibration exposure
include wearing gloves while using the tool, limiting working time, and using accessories in good
condition.

Technical Data

32
18 V DC
0 – 18000 min
≤ 102 dB(A)
228 km/h
4.5 kPa
30 x 17.5 x 19.5 cm
1147 g
1.0 m/s 2
-1