Philips hue Notice D'emploi page 4

Wire Connectors Instructions:
EN
1. Turn off power before installing or removing connectors.
2. Strip wires 5/16"(7.9mm). For #16 and smaller wires, strip 3/8"(9.5mm).
3. Pre-twisting unnecessary, hold stripped wires together with ends even.
4. Push wires into connector and screw on until two twists are visible in wires.
For use with copper to copper conductor
Temperature Rating: 105°C (221 °F) Max.
Voltage Rating: 600V Max. building wiring; 1000V Max. in fixtures and signs
Listed as a PRESSURE-TYPE wire connector on the following Solid wire combinations:
For UL Listed, CSA Certified
Max. wire size (AWG): 22 - 10
Splice capacity: 3+ ground
4