Paramount BLT-999W-13/42 Directives D'installation Et De Fonctionnement page 5

BUILT -IN INSTALLATION
Wall opening size = W33"x H17.5" x D5"
INSTALLATION OF THE APPLIANCE
Note: It is recommended to have the unit stand out of the wall by a minimum of 1/2" or 1.5cm (Plan A).
If you prefer the appliance to be flush with the wall, please refer to Plan B.
1. Attach the built-in mount bracket to both sides of the appliance.
(Plan A: Inner Hole; Plan B: Outer Hole; as shown below).
2. Lift fireplace carefully with the help of another person and insert into opening.
3. Make sure that the power supply port is not behind the wall.
4. Level the fireplace.
5. Secure the fireplace to the wall with the built-in mounting bracket (as shown below).
WALL MOUNT INSTALLATION
1. Attach the provided wall mounting bracket to the wall. Make sure it is level.
2. Lift appliance unit and insert the stakes for hanging into keyholes on the back of the unit.
3. Check the appliance for stability, ensuring that the appliance will not pull free from the wall.
- 5 -