Salicru CS141 Manuel D'installation Rapide page 10

EN
4. Access to the CS141 over the network
4.1. Add the route of the standard IP address on your computer
1.
Open the "DOS Command Prompt" or
2.
execute "cmd.exe"
3.
Enter the following command:
„route add 10.10.10.10 <local IP Address>"
(for example:
"route add 10.10.10.10 192.168.222.54" )
4.
Execute the command "ping 10.10.10.10" to check
if the device is reachable.
Advice: The CS141 needs approximately 30 seconds
to start the webserver. If the webserver runs, the LED
will changes from red (booting) to green and starts
blinking.
4.2. Automatic search with the tool "Netfinder"
The following link leads to the software "NetFinder"
that search your device on the network automatically:
http://www.generex.de/generex/download/software/
install/NetFinder.zip
5. Access via HTTP connection and login
1.
Start a Browser
2.
Enter the address http://10.10.10.10
3.
For the login choose the
user name: „admin"
Default password: „cs141-snmp"
6. Choose language
1.
Choose the entry
- System
- General
At the drop-down menu on the left side.
2.
Choose the preferred „Language".