Warranty Policy - ITC IPT-700V Guide D'utilisation

MAINTENANCE
WARNING - Before attempting any maintenance, be sure the tool is disconnected from the power supply.
● Keep the tool clean using a soft damp (not wet) cloth. Do not use solvents on the plastic parts.
Do not use abrasives.
● Check that external screws are tight.
● Clean the ventilation slots regularly with a jet of air to prevent the tool overheating.
● Lubrication is not necessary. After long use, have an authorized service center maintain and lubricate the tool.
● Any internal maintenance on this tool must be carried out by a qualified technician.
WARRANTY

WARRANTY POLICY

ITC Tools and Equipment
All ITC branded products are guaranteed against
defects in workmanship and materials, when the
product is used for the purpose for which it was
designed, for the useful life of the tool. Any ITC product
that fails during normal use and within the specified
warranty period for that product will be repaired or
replaced at ITC's discretion.
ITC product warranties apply to ITC products
purchased new from an authorized ITC distributor to
the original retail purchaser only.
See specific product warranty statements below for
more information and limitations.
This warranty is void if there is evidence of misuse,
abuse, alterations, or normal wear and tear. Normal
wear and tear of moving parts can be repaired by
purchasing the appropriate ITC replacement part.
No claim for indirect, incidental, or consequential
damages of any type will be considered including loss
time or wages, or loss of production. All products are
sold with this specific understanding.
Product for which there is a warranty claim must
be returned, freight prepaid to an authorized ITC
distributor, or in the case of power tools, machinery
and hydraulic equipment, to an authorized ITC OR JET
warranty repair centre. All returns must include proof
of purchase and an explanation of the defect or failure.
Go to www.surewerx.com for a list of authorized
warranty repair centres.
Except as listed below, all ITC brand tools are covered
by our Limited Lifetime Warranty.
6
Items Excluded From Warranty
Cutting Tools, Drill Bits, Taps and Dies, Screw
Extractors, Wood and Metal Chisels, Files, Saw
Blades, Knife Blades, Electrical Tape, Reducing
Adaptors, Screwdriver Bits, Batteries supplied with
units, damaged insulating materials, or any tool
showing rounded drive corners, snipe or hammer
marks, bent or broken handles, or normal wear and
tear.
ITC Brand 1 Year Limited Warranty
Hydraulic Jacks, Pallet Trucks, Bench Grinders,
Machinery, Cable Pullers, Service cart, Automotive
Type Air Tools, Creepers, Air and Water Hose Reels,
Multimeter and Thermometer (batteries excluded),
Torque Wrenches (calibration is not covered by
warranty except when required due to warranty repair
service)
ITC Power Tools
1 Year Warranty
These products are designed for use in light or
intermittent duty applications. They are not intended
for use in production, industrial or continual use
applications.
This warranty does not extend to normal wear or
consumable parts such as grinding discs, saw blades,
driver bits, electrical motor brushes, worn cords, etc.
Multiple piece kits and sets
Warranty applies only to the defective component, not
the complete kit or set.
NOTE: Batteries supplied with certain products may
have been exposed to a long shelf life resulting in low
energy or dead batteries. Please source replacement
batteries locally. Please follow operating instructions
for rechargeable batteries used in certain products.
Dead or low energy batteries do not constitute a
warranty claim.
!