Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Labels on Appliance
The following pictograms along with the date code are
shown on the appliance:
Warning! Hot surface.
Features
This tool includes some or all of the following features.
1. Steam head
2. Steam head hanger
3. Clothes hanger
4. Trouser hanger
5. Flexible hose
6. Adjustable pole
7. Pole locking clamp
8. Control panel
9. Water tank
10. Base
11. Hose connector
12. Heat resistant glove
13. Collar board
14. Seam clamp
15. Brush
16. Back board
Assembly
Warning! The appliance must be disconnected from the
mains before any assembly, cleaning or maintenance.
•
Insert the adjustable poles (6) into the top of the base
unit (10).
•
Insert the clothes hanger (3) and trouser hanger (4)
assembly into the top adustable pole as shown in figure
A.
•
Turn the base locking clamps (6a) to the lock position at
as shown in figure B.
•
Once you are happy with the desired height, turn the
pole locking clamps (7) to the lock position as shown in
figure C.
•
Insert the steam head hanger (2) into the top of the
clothes hanger assembly (3) and push down until secure
as shown in figure D.
Use
•
Insert the flexible hose (5) coupling into the hose
connector (11). Push it down firmly and rotate it
clockwise to lock it in place as shown in figure E.
8
(Original instructions)
•
Lift the water tank (9) away from the base (10) as shown
in figure F.
•
Undo the water tank valve (9a) by turning anti clockwise
as shown in figure G.
•
Fill the water tank (9).
•
Re-fit the valve (9a).
Warning! Do not put perfume, vinegar, starch, descaling
agents, ironing aids or other chemicals or additives in the
water tank.
Note: It is recommended to use purified water or filtered
water, which makes the Garment Steamer more durable.
•
Replace the the water tank (9) and connect to a power
source as shown in figure I.
GSTM2050 (Fig. J)
•
Rotate the knob clockwise, and start the machine.
•
Choose different functions by adjusting the knob.
•
The stream reaches maximum on the very right and
minimum on the very left.
GSTD2050 (Fig. K)
•
Press the "Power" button to start the machine.
•
Press in the "Function" button to select the appropriate
function.
Attaching accessories (Fig. L, M)
•
Snap the brush (15) top end on the upper edge of the
steam head (1), and push downwards until it clicks into
place securely (Fig. L).
•
Snap the seam clamp (14) top end on the upper edge of
the steam head (1), and push downwards until it clicks
into place securely (Fig. M).
•
To dismantle, follow these steps in reverse.
Tips for optimum use
•
Steam only in an up and down vertical motion.
•
Never use steamer in a horizontal position or tilt into a
backward position, this may result in hot water discharge
(Fig.N).
•
Heat resistant glove may help to prevent from burns.
•
The brush accessorry (15) can be used for removing fluff
(Fig O1).
•
The collar board (13) can be used for steaming collars
(Fig. O2).
•
Use the backboard (16) to add a stable backdrop for
larger garments (Fig. O3).
•
Use the seam clamp (14) to produce crisp seams in
trousers etc. (Fig. O3).
Publicité
