Publicité
Les langues disponibles
Les langues disponibles
When plugging the appliance into the outlet prior to use, be aware that
the appliance has a polarized plug (one blade is wider than the other). As
a safety feature this plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
This product is for household use ONLY!
This appliance is for: 110-240V ~, 50/60Hz, 110W (US)
1. Plug in Base.
2. Place the Magnify Rollers on the platform prongs. Then, Press
the On Button.
3. The Platform will light up, when turned on, with Blue LED Lights that
reduces bacteria on the rollers while heating.
4. Wait for 2-3 minutes, until Red Dot on the top of the Rollers has
brightened fully. This lets you know that the rollers are heated and
ready to be used!
5. Section the hair as needed.
Note: The cooled acrylic edges on the rollers are specifically designed, to make styling
safe and easy!
6. Roll the hair in small sections, using the Magnify clips to hold the roller
in place.
7. Start rolling the hair from the top of the head and crown, moving to the
sides and then to the back of the head. If you have layers, work from
the top layer to the bottom.
8. Wait for 5 minutes or longer, after the red dot has dimmed or
disappeared and the roller has cooled, to remove the roller. The longer
the roller stays in, the more curl and body the rollers will create.
9. Brush through the hair for softer more magnified natural body.
Your appliance is virtually maintenance free. No lubrication is needed.
Keep heated surfaces clean and free of dust, dirt, and hair spray. If
cleaning becomes necessary, disconnect the appliance from the power
source, allow to cool completely and wipe the exterior with a damp cloth.
Allow to completely dry before next use. Do not use abrasive cleansers
on the appliance, as this will damage the heating surface. If the cord
becomes twisted, untwist prior to use.
Electrical converters CANNOT be used.
3
SAVE THESE INSTRUCTIONS
OPERATION INSTRUCTIONS
BASIC OPERATIONS
MAINTENANCE
Publicité
