4.6
Status values and advanced settings
WARNING: This operation is used to assist servicing and future repairs.
The default settings should only be modified by an experienced professional person.
The system's settings can be checked and adjusted via the remote control by following these
steps
Step 1 : Keep pressing
Step 2 : Press
and
Step 3 : Press
to select the setting to be modified.
Note, some settings cannot be modified. Consult the settings table for further information.
Step 4 : Press
and
Step 5 : Press
to set the new value.
Step 6 : Press
to return to the main screen.
Paramètres
C0
Default temperature(heating mode)
C1
Température par défaut (mode chauffage)+B5:B24
C2
Power-off memory function
C3
Exhaust temperature protection setting value
C4
Maximum setting of heating temperature
C5
Minimum setting of heating temperature
C6
Deviation set value of heating up to temperature and stop
C7
Default temperature(cooling mode)
C8
Adjustment of temperature difference for restart(cooling mode)
C9
Deviation set value of refrigeration reaching temperature stop
C10
Maximum setting of cooling temperature
C11
Minimum setting of cooling temperature
C12
Low ambient temperature protection temperature value
C13
High ambient temperature protection temperature value
C14
Adjustment of temperature difference for ambient temperature protection
H0
Defrost auto-activation time
H1
Maximum defrost duration
H2
Defrost deactivation temperature
H3
Defrost activation coil temperature
The temperature difference between entering the defrosting environment
H4
and the outdoor coil
H5
defrosting outdoor ambient temperature
4. Use
+
until you enter the settings verification mode.
for see the parameters.
to adjust the setting value.
Description
Range
Comment
value
15~40°C
27°C
1~15°C
2°C
0~1
1(memory)
30°C~115°C
110°C
30°C~60°C
40°C
5°C~30°C
15°C
0°C~18°C
0
8~28°C
27°C
0°C~15°C
2°C
0°C~18°C
0
20°C~35°C
28°C
2°C~18°C
8°C
-25-20°C
-7°C*
35-60°C
42°C
1-10°C
2°C
1~240min
30min
1~25min
8min
1~25°C
20°C
-20~20°C
-3°C
0~15°C
5°C
0~20°C
20°C
EN| 15