Align
Abound
Illustration 48. Permanent Wall Hanger Kit Without Horizontal Supports (cont):
Illustration 48b. Slotted Standards Configurations:
Illustration 50. Kit de support mural permanent sans supports horizontaux (suite):
Illustration 50b. Configurations des montants à encoches standard:
Align
Illustration 48. Permanent Wall Hanger Kit Without Horizontal Supports (cont):
Illustration 48b. Slotted Standards Configurations:
De l'intérieur de l'encoche
Inside of slot to inside of slot
Nominal component width minus 1/4"
Inside of slot to inside of slot
Nominal component width minus 1/4"
343-1555E
PAGE 37 OF 70 (1/08)
De l'intérieur de l'encoche à l'intérieur
Inside of slot to inside of slot
de l'encoche Largeur nominale de
Nominal component width minus 1/4"
l'élément moins 0,25 po (6,4 mm).
Inside of slot to inside of slot
Nominal component width minus 1/4"
à l'intérieur de l'encoche
Largeur nominale de
l'élément moins 0,25 po
(6,4 mm).
Shared slotted standard
for side by side application.
Installation Packet
Instructions d'installation
Installation Packet
De l'intérieur de l'encoche
à l'intérieur de l'encoche
Inside of slot to inside of slot
Nominal component width minus 1/4"
Largeur nominale de
l'élément moins 0,25 po
(6,4 mm).
Inside of slot to inside of slot
Nominal component width minus 1/4"
143-0118B
PAGE 44 DE 44 (11/09)