J5create JVAW52 Guide D'installation Rapide page 2

English
1. Hardware Features Overview
TX
⑤ ① ② ③
Note:
*① If TX and RX connect failed. You can reduce the distance between the TX and RX. If you still have trouble please contact j5create Customer Service.
*⑥ Indicator: Red: power on
2. Hardware Installation
Step 1.
Plug in the power adapter and ensure the power led lights are on.
Step 2. (Optional): IR remote control setting
Connect the IR blaster cable into the IR out port.
Step 3. (Optional)
Place the IR sensor on the source device, and mount the
IR blaster head beside the device
Step4.
Directly connect the HDMI™ cable from the Transmitter HDMI™ in
connector to your HDMI™ video source device.
TX
IR blaster
cable (black)
Player
3. Receiver : OSD (on-screen display) status
Startup screen : OSD show connecting.
Wireless Display HDMI™ Extender
RX DEVICE NAME
HDMI5G_RX0008
②
If connecting devices via HDMI™ port fails:
™
Please check your HDMI cable or signal from your source device.
Wireless Display HDMI™ Extender
Please connect your device via the HDMI™ port.
RX DEVICE NAME RX FIRMWARE VERSION
HDMI5G_RX0008 2020.5.12.0
*
① PAIR
② IR out
⑥
③ HDMI™ in
④ DC 5V
⑤ Security lock slot
* ⑥ Wireless and power
status indicator
④
/ Orange: Waiting for pairing
Power in
HDMI™ in
Game
Console Laptop
Connecting...
RX FIRMWARE VERSION
2020.5.12.0
(Fig.1)
③
STATUS
No input source from sender
(Fig.2)
RX
⑤
/ Red flashing light : TX / RX pairing
Step 1.
Plug in the power adapter and ensure the power led lights are on.
Step 2. (Optional): IR remote control setting
Connect the IR extension cable (green connector) into the IR out port.
Step 3. (Optional)
Step 4.
Directly connect the HDMI™ cable from the Receiver HDMI™ out
connector to your HDMI™ monitor.
RX
IR Receiver
cable (green)
STATUS
Sender not found
④
Network disconnected.
You can reduce the distance between the TX and RX. If you still have trouble,
please contact j5create Customer Service.
Wireless Display HDMI™ Extender
RX DEVICE NAME
HDMI5G_RX0008
*
⑥
*
① ② ③ ④
/ Green: TX / RX pairing completed
Place and mount the IR sensor in front of the device.
HDMI™ out
(Remote control
not included)
①
①
②
③
④
- Sender not found
- TX RX Pairing
- No input source from sender
- Network disconnected
Connection failed.
RX FIRMWARE VERSION STATUS
2020.5.12.0 Network disconnected
(Fig.3)
① PAIR
② IR in
③ HDMI™ out
④ DC 5V
⑤ Security lock slot
⑥ Wireless and power
status indicator
Power in
108 0P