Publicité
Les langues disponibles
Les langues disponibles
Adding/Subtracting 2 Volumes
E
You can measure the volume of room or object
and then add it to, or subtract it from, the volume of
another room or object (Figure
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press
(Figure
and display the red laser dot.
3.
Make sure the tool position setting (Figure
is correct for taking the measurement.
4.
Select
as the measurement type.
• Press
to display the Main Menu
(Figure
E 2
• Press
to select
• Press
Menu (Figure
• Press the arrow buttons to select
• Press
5.
Press
to add, or
of two rooms or objects.
6.
Measure the width (Figure
• Position the tool at one end of the room or
object and point the laser dot across the width.
(Figure
O 1
tool if you are measuring from the bottom of
the tool.)
• Press
at the top of the screen.
7.
Measure the length (Figure
• Position the tool at one end of the room or
object and point the laser dot across the length.
(Figure
O 2
tool if you are measuring from the bottom of
the tool.)
• Press
on the second line of the screen.
16
All manuals and user guides at all-guides.com
).
O
) toward a wall
A 1
) to turn the tool on
A 3
).
.
to display the Measurement Type
).
E 3
.
to subtract, the volumes
).
O
1
shows where to position the
to display the width measurement
).
O
2
shows where to position the
to display the length measurement
8.
Measure the height (Figure
• Position the tool at one end of the room or
object and point the laser dot across the height.
(Figure
tool if you are measuring from the bottom of
the tool).
• Press
on the third line of the screen.
9.
Follow the same steps to measure the width,
length, and height of the second room or object.
)
C 4
10.
View the Volume measurement at the bottom of
the screen (Figure
Measuring the Height of a Tall Object
If you need to measure the height of a tall object
(e.g., a tall building), you can calculate the height
based on the distance to 1 point or the distances
from the same point to 2 points on the object. The
tool will use the Pythagorean Theorem (C
.
calculate the height.
Distance to 1 Point
You can use the distance to one point on a wall
or object (Indirect Height) to determine its height
(Figure
).
P
1.
Point the tool's laser (Figure
or object, and not toward anyone's eyes.
2.
Press
and display the red laser dot.
3.
Make sure the tool position setting (Figure
is correct for taking the measurement.
4.
Select
• Press
(Figure
• Press
• Press
Menu (Figure
• Press the arrow buttons to select
• Press
5.
Position the tool opposite the bottom of the
vertical height to be measured (Figure
).
O
3
shows where to position the
O 3
to display the height measurement
).
O 4
) toward a wall
A 1
(Figure
) to turn the tool on
A 3
as the measurement type.
to display the Main Menu
).
E 2
to select
.
to display the Measurement Type
).
E 3
.
=A
+B
) to
2
2
2
)
C 4
.
).
P 1
Publicité
