Philips HQT789/00 Mode D'emploi page 2

ENGLISH
4
C
C
C
Important
Check if the voltage indicated on the power
plug corresponds to the mains voltage in your
home before you connect the appliance.
Make sure that the appliance does not get
wet.
This appliance is only designed for trimming
the human beard. Do not use the appliance
for any other purpose.
Keep the appliance out of the reach of
children.
Charge and store the appliance at a
temperature between 15cC and 35cC.
Charging
Charge the appliance fully before you start using
it for the first time.
1 Make sure the appliance is switched off.
2 Insert the appliance plug into the
appliance.
3 Put the powerplug in the wall socket
(100-240 V AC).
As soon as you connect the appliance the
upper mains plug symbol appears in the
display and the blinking segments indicate the
charging capacity.
It will take approx. 1 hour to fully charge the
battery.