Levelling The Mini-Bar; Cleaning Before Use; Before Connecting, You Must; Start-Up - Brandy Best SILENTPRO28 Notice D'emploi

Levelling the mini-bar

Once the mini-bar is in its final position, ensure that it is level. Adjustments can be made using the two le-
velling feet at the front of the mini-bar.
If the appliance is not level, the alignment of the doors and the magnetic contacts will be affected.

Cleaning before use

Wipe the interior of the mini-bar with a mild solution of bicarbonate of soda. Then rinse with hot water using
a sponge or a wrung cloth. Wipe the appliance in its entirety until there is no more water, then replace the
shelves and drawers. You can clean the exterior with a mild detergent.

Before connecting, you must:

Check that the plug is compatible with the power cable of the appliance. If this is not the case, contact a
specialist technician for assistance.
CAUTION: THIS APPLIANCE MUST BE GROUNDED.

Start-up

Before putting drinks in your mini-bar, leave it running for 24 hours to ensure that it is functioning properly,
and to allow it to reach the correct temperature.

Mini-bar start-up

All you need to do is plug in the mini-bar and set a temperature on the thermostat located on the back of
the product.
NOTE: Do not store gas or combustible liquids in the mini-bar.
Low temperature
±6 à 8°C
±16°C
±12°C
High temperature
Page 8