Teknofun 811101 Manuel De L'utilisateur page 26

Choosing the image quality
Press the OK key and then the LEFT and RIGHT keys to select the icon
1.
2. Press the UP and DOW N keys to select the desired quality:
High quality
Low quality (default mode)
3. Press the OK key to confirm settings and go back to Photo mode.
Selecting the light source frequency
A higher frequency increases the camera shutter speed so the effect of light fluctuations from
sources such as fluorescent lamps is reduced.
1. Press the OK key and then the LEFT and RIGHT keys to select the icon
2. Press the UP and DOW N keys to select the desired frequency: 50Hz or 60Hz.
Press the OK key to confirm settings and go back to Photo mode.
3.
9
.
.