Ener-G+ HEA-21899 Guide D'utilisation page 5

4
Hanging mounted
Step 1: Remove the four M6*10 screws from the heater and put them aside.
Step 2: Adjust and center the sliding brackets behind the heater with a distance of about 380 – 788 mm between
them. Place the hanging bracket over the sliding bracket and screw them tightly with four M6*10 screws.
MAKE SURE THE SLIDING BRACKETS DON'T MOVE!
Step 4: Place each chains with hooks on the hanging bracket.
Step 5:
Attach the free hook onto a secure post, beam or any solid attachment object. You can also attach the
free hook to the kook on the hanging bracket to go around an obstacle or around itself.