Table Des Matières - Ener-G+ HEA-21899 Guide D'utilisation

CONTENT
1. Assembly
2. Clearance
3. Operation
4. For your safety
5. Cleaning and storage
6. Specifications
7. Grounding instructions
8. Warranty
FRANÇAIS
Please empty the packing box thoroughly, and make sure that there are no missing parts.
MAKE SURE THERE IS NO DAMAGE TO THE UNIT AND POWER CORD.
IF THERE IS ANY DAMAGE OR
1. ASSEMBLY
Wall mounted: Brick or Concrete
Step 1: Remove the four M6*10 screws from the Heater and put them aside.
Step 2: Screw the four M6*10 screws on the mounting plate with the provided hexagonal key. You must leave a
2-3 mm gap between the screws and the back mounting plate. Adjust the bracket to the desired wall angle with
the adjustment screw.
Please read instructions carefully before assembly
Veuillez lire attentivement les instructions avant l'assemblage
Retain this manual for reference
Conservez ce manuel pour référence
IF THERE ARE MISSING PARTS, PLEASE CONTACT 1-866-967-7333 ext 227.
1