Publicité
Les langues disponibles
Les langues disponibles
9. TROUBLESHOOTING
PROBLEMS
The unit does not turn on.
The screen is blank.
There are smudges or blemishes on the
screen.
Microscope is connected to a television, but
no image appears on the television screen.
The battery indicator LED is not illuminating,
even though the power adapter is connected
and plugged into a wall socket.
-or-
The battery is not charging.
10. WARRANTY
Your Cosmos Digital LCD Microscope has a two year limited warranty. Please visit the Celestron website for detailed
information on all Celestron microscopes: www.celestron.com
FCC Statement :This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
© 2014 Celestron. Celestron and Symbol are trademarks of Celestron, LLC. All rights reserved.
Torrance, CA 90503 • Telephone: 1(800) 421-9649
TM & © 2014 Cosmos Studios, Inc. All rights reserved.
This product is designed and intended for use by those 14 years of age and older.
Product design and specifications are subject to change without prior notification.
Made in China | Fabriqué en Chine | Hecho en China | Hergestellt in China | Fabbricato in Cina
SOLUTION
Check the battery power. If necessary, recharge by plugging into AC power.
•
Ensure that the power is on.
•
Check the battery power and recharge the battery if necessary.
•
Verify that the object you want to magnify is positioned correctly under the lens.
Clean the screen and lens carefully with the included microfiber cloth.
•
Ensure that the television is on.
•
Switch to the appropriate video input channel on your television. (This will vary by
manufacturer.)
•
Ensure that the video cable is securely connected to the microscope's Video Out port
and plugged into the correct video input on your television
Make sure the cable is plugged into the proper port.
Check that the outlet has power and is not malfunctioning. If the outlet is connected
to a wall switch, make sure that the switch is on.
17
ENGLISH
Publicité
