Selectron Cosmos 44362 Mode D'emploi page 12

In video mode, choices are:
•
- VGA
- QVGA
TIME LAPSE SETTING
FRAMES: In this window, you will set the number
•
of frames you want to take.
INTERVAL: In this window the interval between
•
shots is set.
- Once you have made your selections, press OK
to confirm and press the Menu/Setup button to
go back to preview mode.
- When you press the Capture Button to begin
your time lapse, you will notice a new icon
screen.
- When all the frames are taken, the microscope
will go back to the preview screen.
- To stop the auto capture before it completes,
press the Capture Button once.
-NOTE: The TIME LAPSE setting only works in Still Image mode.
QUALITY
The Quality settings determine the level of compression
for the image you are about to take. The more compression,
the smaller the file size, but the less detail in the image.
There are 3 choices in the Quality setting window:
1. Super Fine (largest files, least compressed)
2. Fine
3. Normal (smallest files, most compressed)
12
I ENGLISH
is displayed in the upper left corner of the
NOTE: The number above represents 32 frames.
NOTE: The number above represents 15 seconds.