Accessory
Accessory
External battery cabinets
To extend UPS autonomy in the event of mains interruption, the following
optional external battery cabinets are available. These cabinets have the
same dimensions, colour scheme and design as the UPS cabinets.
For Technical data of External battery cabinets see Table 4 on page EN-17.
For connection notices see Table 7 on page EN-20.
Additional Battery Charger
An additional battery charger is available to support Linear Plus in case of
large battery applications. This board must be installed only if external
battery cubicles are used.
The additional battery charger can be mounted into Linear Plus 6 kVA or 10
kVA devices with the status NON SIB and SIB A.
Fig. 30: Linear Plus rear side
EN-68
Space for Additional
Charger behind this
panel
User Handbook
CHLORIDE LINEAR Plus/RM
SU59802UM01, rev.3/ Last modified: 08/2005