Propane Tank Installation - Woodstream Mosquito Magnet PIONEER Mode D'emploi

Propane Tank Installation

1. After trap is placed in its ideal location, place propane
tank onto the molded cradle.
2. Make sure propane tank is fully closed. Attach
propane regulator hose to propane tank. Secure
tightly by hand. Do not use tools.
3. Turn propane on by slowly turning valve counter-clockwise.
Take care not to turn too quickly to avoid engagement of
safety valve.
D
O NOT MOVE TRAP WITH TANK ATTACHED!
TANK MUST BE DISCONNECTED FROM REGULATOR
BEFORE TRAP IS RELOCATED TO AVOID DAMAGE TO
REGULATOR AND/OR TRAP. BE ADVISED, DAMAGE
CAUSED FROM FAILURE TO COMPLY WITH THIS
INSTRUCTION IS NOT COVERED UNDER WARRANTY.
CAUTION
DO NOT BUMP HOSE ATTACHMENT
WITH PROPANE TANK. DO NOT
TAMPER WITH HOSE ATTACHMENT
CONNECTED TO TRAP.
Set-Up
Step 1 - Propane Tank Placement
Step 2 - Attach Regulator
Step 3 - Slowly Open Valve
E11