Publicité
Les langues disponibles
Les langues disponibles
Safety Cautions
Warning :
Switch off the induction cooker in case of any crack on the cook-top panel.
1.Please do not open, modify parts, or repair the unit by yourself.
2.When the power cord is damaged or the power plug not firmly seated into the socket, please do not use it.
3.Please do not make any dust or obstructions in the power cord.
4.Please do not bend, band or pull the power cord, avoid damaged.
5.Please do not touch the power cord when wet your hands.
6.Please do not use the unit near the fire or moist place.
7.Prohibit using when the pan without any food and water.
8.Do not use the pot or wok which the bottom has been brushed varnish.
9.If the glass has a crack, please turn off the power and send it to repair.
10.After cooking, should not immediately pull the plug, waiting the temperature drop until the fan stopped.
11.Do not unplug the power cord directly to turn it off.
12.In order to avoid to break the glass, please be careful, can't drop the things on the top plate.
13.Please be careful the power cord and plastic things can't near the top plate when cooking.
14.Please do not put the plastic container and paper on the top plate to heating.
In order to avoid scald, please note the following when you using:
Please do not using where the child can touch.
Please do not using as without pot.
Please clean the bottom of the pot before using, in order to avoid burning.
Product operating instructions
Insert the plug into the socket, a "Beep" will emit and all the indicators flash a time, the indicator of
[On/Off] lights up, indicating the appliance in connection with a power source, known as standby mode.
Place a suitable cookware on the center of the cooking zone. The [On/Off] button is pressed a time, the
appliance goes to selection mode . Press the corresponding function buttons to start operation.
Stop the operation and switch to standby mode by pressing [On/Off] button after cooking.
Cooking mode
Power:
Press the [
] button once and the indicator of [
the default power is 1400W. Press [+] or [-] to set the desired power, there are 9 power levels in total
(200W, 400W, 600W, 800W, 1000W, 1200W, 1400W, 1600W, 1800W).
To cancel this mode, press other function button or [On/Off] button to stop the operation.
Temp. (℉):
Press the [
] button again and the indicator of [
the default temperature is 356℉. Press [+] or [-] to set the desired temperature, there are 10 temperature
levels in total (140F, 176F, 212F, 248F, 284F, 320F, 356F, 392F, 428F, 464F).
To cancel this mode, press other function button or [On/Off] button to stop the operation.
Max. and Min. Functions
1.Press the [Min] button to set the lowest level of power,display will show[200],power adjustment,
timer and preset setting is not available.
2.Press the [Max] button to set the highest level of power,display will show[1800],power adjustment,
timer and preset setting is not available.
] lights up, display will show [1400] representing that
] lights up, display will show [ 356F] representing that
2
Publicité
