Bluetooth Pairing - Hama KEY4ALL X3100 Mode D'emploi

6. Operation
Note
• The functions described in this
section are only available for
Bluetooth-capable terminal devices.
• Note that the maximum range for
Bluetooth is 10 metres without
obstacles such as walls, people, etc.

6.1 Bluetooth pairing

Note – Pairing
• Make sure that your Bluetooth-
capable terminal device is on and
Bluetooth is activated.
• Make sure that your Bluetooth-
capable terminal device is visible for
other Bluetooth devices.
• For more information, please refer
to the operating instructions of your
terminal device.
• Slide the OFF/ON switch (2) to the ON
position to switch on the Bluetooth
keyboard. The power status LED (6)
lights up.
• Press and hold the Connect button
(1) until the Bluetooth status LED (4)
begins to continually flash blue. The
keyboard is searching for a Bluetooth
connection.
• Open the Bluetooth settings on your
terminal device and wait until Hama
KEY4ALL X3100 appears in the list of
Bluetooth devices found.
• Select Hama KEY4ALL X3100 and enter
the numeric code specified on your
device using the Bluetooth keyboard.
Press the Enter key to confirm and
wait until the keyboard is shown as
connected in the Bluetooth settings
on your terminal device. The Bluetooth
status LED (4) goes out.
• You can now use the Bluetooth
keyboard.
5