Edenwood RCD B11 USB Consignes D'utilisation page 25

B
Product usage
WARNING! Listening to very loud music can damage your hearing. Avoid listening
to very loud music for extended periods of time.
AUX IN
• Press the
• Insert an AUX cable connector into the unit's AUX IN (3.5 mm) jack. Insert the other end
of the cable into the external device.
• Adjust the volume to the desired level via the unit or external device.
• Perform the play, pause and next/previous commands via the external device.
Radio
Tuning the radio stations
• Press the
the display, e.g. 97.10 MHz.
• Tune the desired station by pressing the
or holding down the relevant button to quickly scroll through the frequency. If the radio receives
an FM stereo signal, the
NOTE: The FM stereo signal
only appear for stereo signals. The symbol will not be displayed for other types
of signals received.
• Fully extend the telescopic FM aerial and carefully move it back and forth to get the best
reception or place the unit in an unobstructed location.
• To turn off the radio, press the
and hold the
Automatic radio station scan
• Press and hold the
stations when a powerful signal is detected. Once it has completed the scan, the unit will
broadcast P01 (Programme 1).
• Press the
• To clear all saved stations, press and hold the
on the display.
Using the radio station memory
You can save up to 30 FM radio stations in the memory.
• Press the
• Press the
• Press the
• Press the
stop flashing.
button to select AUX mode.
button to select FM radio mode. The frequency will be indicated on
icon will appear on the display.
icon depends on the reception signal and will
button to switch to another function or press
button to turn off the unit.
button. The unit will automatically search and save
button repeatedly until the desired saved station is displayed.
or
button and the programme number P01 will flash on the display.
button to save the station to your desired programme number.
button to confirm and the programme number i.e. P01, will
23
or
button until Clr appears
button to select the desired station.
EN
buttons