Energy Saving Tips - Koenic KFZ 45211 A2 NF Mode D'emploi

Energy saving tips

• Do not place the product in the vicinity of a
heat source (radiator or kitchen stove, etc.).
• Ensure unobstructed air flow around the
refrigerator and freezer.
• If an ice layer has built, defrost the unit. A
thick ice layer affects the transmission of the
cold, thus the energy consumption will be
increased.
• When opening and taking out food, only
open the door shortly. A shorter door
opening time causes less ice to deposit on
the freezer walls.
• Select the temperature regulator setting
according to the of filling amount of the
product.
• Use drawers, baskets or shelves to store the
food. If the energy of the product is used
efficiently, the energy consumption can be
minimized.
KFZ45211-A2-NF_170803_V03_HR.indb 19
Cleaning and care
Warning
• Unplug the product before cleaning.
• When cleaning, never use solvents or
abrasive materials, hard brushes, metallic
or sharp objects. Solvents are harmful to
human health and can attack plastic parts,
while abrasive cleaning materials and tools
may scratch the surface(s).
• Never use oil or grease on the door seal.
This will make it porous over time.
• Do not use steam cleaning equipment. The
steam may come in contact with electrical
parts of the product, causing a short
circuit.
• Clean the product's exterior surfaces with
a slightly damp cloth and then dry them
thoroughly.
• Make sure that no water enters the product
interior (for example, through the switch).
• Wipe the door seal with clean water only, and
dry it thoroughly afterwards.
• Removable parts e.g. glass shelves, can be
taken out for cleaning.
English
19
3/8/17 10:30 am