Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Assembly
Parts List (Fig 3)
Item #
Part Name
1
2
Wheel Retainer
3
4
ST5.5x17 Screw
5
M6x30 Bolt
6
M6 Lock Nut
nstallation Procedure
I
1.
Assemble 4 disc blocks together in head and tail connection mode, this first disc ringis
placed face down. (fig. 4)
2.
Install 4 wheel retainers on the first disc ring by screws. (fig. 5)
3.
Place the second disc ring on the top of the first disc ring face up. Fasten the two layers
of disc rings by bolt & nut kits and screws. (fig. 6)
4.
Turn the assembled wheel disc upside down, fasten 4 casters and two rings by screws.
(fig. 7)
Technical Specification
Maximum Loads
Disc diameter
Product height
Caster size
Warranty
The Winntec Smart Disc is covered by a three years warranty. This Warranty is voided if the
product is used in an inappropriate manner or if the user fails to follow the instructions listed
above.
You are now ready to use your new Intec Smart Disc!
Disc Block
2" Caster
QTY
8
4
4
40
8
8
471123
Illustration / Part #
TH11-000-0001
TH11-000-0002
TH11-000-0003
TH11-090-0001
TH11-090-0002
TH11-090-0003
160 kg
68 cm
9,1 cm
Dia. 5,0 cm
5
Publicité
