Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Temperuture
Controls
Dial Temperature Controls
The controls are located at the back left of the
refrigerator
compartment.
Note:
The freezer control turns the cooling system
on. Neither section will cool if freezer control is set
to OFF.
Initial Control Settings
After plugging
the refrigerator
in,
set the controls.
• To adjust the controls, turn the
control knob to the left or right
as desired.
• Set the Freezer control on 4.
• Set the Refrigerator
control on 4.
• Let the refrigerator
run at least 8
to 12 hours before adding food.
Warm Cabinet Surfaces
Freezer
O
3,
_
e
eS
®6
3 "
* ®5
06
,
•
(_old
Coldesl
At times, the front of the refrigerator
cabinet may be
warm to the touch. This is a normal occurrence
that
helps prevent moisture from condensing
on the
cabinet. This condition will be more noticeable when
you first start the refrigerator,
during hot weather and
after excessive or lengthy door openings.
Adjusting the Controls
• 24 hours after adding food, you may decide that one
or both compartments
should be colder or warmer. If
so, adjust the control(s)
as indicated
in the
Temperature Control Guide table below. See page 16
for instructions
on checking
compartment
temperature.
• Except when starting
the refrigerator,
do not change
either control more than one number at a time.
• Allow 24 hours for temperatures
to stabilize.
• Changing
either control will have some effect on the
temperature
of the other compartment.
Temperature
Control Guide
Refrigerator
too warm
Turn the Refrigerator control
to next higher number.
Refrigerator
too cold
Turn the Refrigerator control
to next lower number.
Freezer too warm
Turn the Freezer control to
next higher number.
Freezer too cold
Turn the Freezer control to
next lower number.
Turn refrigerator
OFF
Turn the Freezer control to
OFF.
Note:
Turning Freezer control to OFF stops cooling
in both compartments.
It does not shut off power to
the refrigerator.
Publicité
Table des Matières
