B-Speech Joggy Manual D'utilisation page 3

GB
About This Manual
This manual provides information for setting up and configuring the Headset.
This manual is intended for home users.
Getting Started with the Headset
Congratulations on your purchase!
This section covers unpacking the Headset and identifying components.
Unpacking and Checking the Contents
Joggy | USB charging cable | User manual | Changeable ear gels
If any item is missing or damaged, repack the Headset and return it to your reseller.
Identifying Components
The following illustration shows the Headset parts.
1
2
3
4 7
5
8
6
4
1. Volume +
2. Previous
3. MFB - Press to turn on/off
- Press to pairing with a Bluetooth device
- Press to answer incoming call
- Press to finish a call
4. LED
5. Volume -
6. USB port
7. Next
8. Microphone
Headset Status LEDs Main Functions
LED:
Colour
Blue flashing
Blue flashing slowly
Blue/Red blinks alternately
Red permanently on
Red off
Red blinking
Charging the Battery
The Headset has a built-in rechargeable battery. The Battery can be charged through the USB cable or
a travel charger.
Charging with the USB Cable
Refer to the following to charge the Headset with the USB cable.
1. Connect the small connector on the USB cable to the Headset.
2. Connect the other end of the cable to a USB connector on your computer.
The Power LED lights red to indicate charging.
3. Unplug the USB cable when the Power LED is off.
NOTE: Most notebook computer USB connectors are horizontal. The USB cable should be connected
with the USB icon facing up. If the USB connector on your computer is vertical, connect the cable
carefully to avoid damaging the connectors.
Function
Powered on
Connected to device
Pairing
Charging
Charging complete
Battery low
GB
5