DJO Global Compex WIRELESS Mode D'emploi page 16

Then, place the modules in the spaces provided.
To do this, place the pod without the On/Off button (the green one in the illustration) in
the slot indicated in green and the other pod in the blue slot. Do the same for the
others modules.
The pod without the On/Off button has to be inserted over the small connectors. A
magnet and the little vertical mark on the shell of the pod should help you to properly
position the pod in its slot. When placed correctly, you should hear a click.
When you place a module on the docking station, a red circle will appear to indicate that
charging is in progress . The module is still charging as long as the red circle is visible. As
soon as this disappears, the module is completely charged and ready for use.
Please note: If you place a fully charged module on the docking station, no red circle will appear.
As soon as the remote control and the modules are fully charged, the current time will be
displayed.
14