Publicité
Les langues disponibles
Les langues disponibles
Prepare the appliance for use
1. Check if the rating indicated in the rating plate corresponding to the main vol-
tage in your home.
2. Press handle button to lay handle down.
3. Remove the protective foil or sticker or card from the soleplate.(Fig. 1)
4. Fully unwind and straighten the power cord and the supply hose.
5. Place the appliance on a stable, level and horizontal surface such as ironing
board
6. Place the iron onto the iron rest plate horizontally at the base unit.
Fill water tank:
1. Press the water tank lock upwards and slide the detachable water tank outwards from the base.(Fig.2)
2. Take the filter upwards out from the water fill hole. (You can take the filter out of the opening for filling water
into water tank, or fill water into water tank directly with the filter existing in the opening).(Fig.3)
3. Fill the water tank up to or below the ¨MAX fill line with clean tap water. (Fig.4)
4. Replace filter back into water tank. When move, please hold the water tank by two hands. (Fig.5)
5. Replace the water tank into the base unit again. It will be locked in place with the base unit until a ¨
click sound is provided. (Fig.6)
6. Always pour out the remaining water after use. (Fig.7)
Note: When the water level reaches a low level or empty, pump will provide sound to indicate refilling. It must
stop to use the appliance immediately and refill water tank as the methods mentioned above.
Use and Operation
10
Publicité
