LENCO SCD-6900 Mode D'emploi page 12

Active/de‐active timer function (In standby mode only)
1. To active timer function, press the "Timer" button once the timer indicator " " will appear in the
LCD display (2).
2. To cancel timer function, press "Timer" button again the timer indicator " "will disappear.
Remark: ‐
 If there is no music source being detected (CD or USB) when the preset time is reached, system will
default to "FM" function for wake‐up mode automatically. The system will preset to the last radio
frequency being listened too before switching off.
 For FM/DAB wake up, the system will preset to the last radio frequency being listened too before
switching off.
 If wake up to buzzer is selected, the unit will emit a "beep beep" sound at the selected time.
 There are about 4 seconds for the alarm setting mode, this system will return to normal mode
automatically if no keys are being pressed in this time frame.
 During the alarm on mode, pressing the "On/off" button (17) will switch off the system.
 Due to display size limitation, timer icon " " will not appear on LCD during operating in FM/DAB
mode
B. Aux‐in connection
Connect the unit to other devices by connecting the Aux in jack (2) with a 3.5mm cable (not provided) and
the other end connect to the external device such as Discman/MP3 player to perform the music playback
or encoding function etc.
1) Select the "BT / AUX" mode by pressing the function button (9) and the unit will automatically switch
to "AUX IN" mode as long as the Aux‐in cable is connected
2) Adjust the Volume Up/Down button (14) to desired volume level.
3) Start to play your external device.
C. Using Headphones
Inserting the plug of your headphones into the Headphone jack will enable you to listen in private.
READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES
1) Avoid extended play at very high volume as it may impair your hearing.
2) If you experience ringing in your ears, reduce the volume or shut off your unit.
3) Keep the volume at a reasonable level to allow you to hear outside sounds.
SPECIFICATION
AC POWER
RADIO FREQUENCY
BLUETOOTH VERSION
NOTE: Due to ERP stage two requirements and to protect the environment, the unit will switch
to standby mode automatically if no music is playing after 15 minutes.
AC 230V ~ 50Hz
FM 87.5 – 108 MHz
DAB: 174.928‐239.2 MHz
V2.1
12