Orbegozo PU 1000 Manuel D'instructions page 14

PU 1000
PRODUCT COMPONENTS
A: Panel B：Composite filter mesh C：Screen D：Touch function button E：Air Duct
BEFORE FIRST USE
Packaging bag must be torn off before use. Then filter mesh shall be installed in the machine correctly.
‐ Before operating the device, please put it 2 meters away from equipment with electric wave (such as
television, radio or clock) to avoid interference of electric wave. Please do not install it at the place where
object such as curtain may block air inlet or outlet, otherwise the component may be polluted or the device
may get out of order.
‐ Please do not install it at the place where the device is exposed to condensation environment directly
because of severe temperature change。Please use it when the room temperature is suitable and varies
from 0 to 35 degree centigrade.
‐ The device must be stably installed and well-ventilated. When the device is put on the ground covered
with sick carpet, it may shake slightly.
‐ Please do not install it at the place where black smoke is produced (such as kitchen and so forth).
‐ Certain space shall be guaranteed around the air purifier. Putting the device at the place with natural flow
of wind can lead to better purifying effect. Furthermore, it can make sure that negative oxygen ion can
arrive at every corner of the room smoothly.
DISMANTLING THE FILTER MESH
1、Dismantling the front cover: Grasp both sides of the upper part of front cover with both hands, then lift
it up before drag it towards your own direction. The front cover then drops off the device body (Do not
overexert in case of damage to the front cover).
14