HACH LANGE Peltier Notice D'utilisation page 5

Module Peltier (contrôle de la température)
When a Peltier Module is installed, Temperature Control are available in the
"Instrument Setup" menu. Temperature Modes can be modified in this menu.
1. Touch Temperature Control in the "Instrument Setup" menu.
2. Enter the desired Parameter for
•
•
•
•
Note: Alternatively, if a Peltier Module is installed, you can touch Temperature Control option icon
directly on the Measurement screen. The "Temperature Control" option screen will appear where
you can change the temperature.
Temperature: Turn temperature control off or turn temperature control on and input
the set temperature.
Warning: The warning alerts the user if the actual temperature deviates from the set
temperature. Use this soft key to turn the warning off or to turn the warning on by
inputting the deviation from set temperature that will cause the instrument to warn the
user.
Unit: Select temperature units of Celsius or Fahrenheit.
Idle: The idle causes the instrument to automatically turn temperature control off after
a user input amount of time. Use this key to turn the idle off or to turn the idle on by
inputting the amount of time in hours to turn temperature control off.
Module de contrôle de la température Peltier
5